We have had requests for custom spreader bars. Offering these were delayed, until we found the quality for the price that our customers expect. You can consider these to be Museum Grade quality, custom made in 100% brass, 1:50th scale. Take a good look at the offerings and click on the thumbnail for a closer look. Please be aware, that the machines shown in the pictures are not part of the product. Initally, there will be a delay in delivery due to an already established waiting list. So, the sooner that you order, you will be put in line on the wait list. Also, if you want a specific color, please note it on the comments line. You can always request the unpainted version.
OBC-03s 100 Ton Beam Type Spreader--All Brass, 1:50
100Ton Beam Type Spreader, custom made in all brass. Various colors available.
OBC-07s 100 Ton Universal Spreader--Brass, 1:50 scale
Introducing a very fine universal spreader in light weight design. Capacity is 100 Ton, and is sure to be a great addition to any crane diorama. Since this is considered a special order, you can request a color for your spreader.
OBC-04s 150 Ton Beam Type Spreader--All Custom Brass
150 Ton Beam Type Spreader, all Custom Brass--1:50th scale. Various colors available.
OBC-02s 150 Ton Tubular Spreader-Single Lugs
Custom 150Ton spreader in solid brass, with single lugs.
OBC-05s 150 Ton Tubular Universal Spreader--Brass, 1:50
Enjoy this Tubular Universal Spreader, custom made of brass in 1:50th scale. Various colors available.
OBC-01s 150Ton Tubular Spreader, Multi Lugs--All Brass
1:50th scale all brass tubular spreader.
OBC-06s 250 Ton Expandable Spreader--All Brass--1:50
Now you can make the spreader fit the job. This model is expandable from 20 ft, 40 ft, or 60 foot. It comes complete with 40 brass bolts and nuts to assemble. Comes with end pieces, plus a 20 ft and a 40 ft insert. Can be ordered in colors, or plain brass.
OBC-08-1RCs Crane Mats, Real Wood, 1:50 scale, 10/set
OK, now, lets get real. These crane mats are a copy of what is being used out there in the field, only 50 times smaller. These are distressed just like the real ones after the first use. Made to represent 12 X 12 timbers, drilled, and bolted together. The ends are even painted to eliminate rot. 10 pieces per set, each being 7" X 1.25". So, your total diorama will have mats measuring 7" X 12.5 inches. In real life, this equates to 29 Ft X 52 Ft. Plenty of base to put that favorite crane on.
OBC-09CRs Fuel Tanks for Construction Sites, 1:50 scale
Now, you can get fuel to the construction items that you have in the fleet. Don't allow your equipment to experience down time due to availability of fuel. This is a great diorama addition to any construction site. Available in two colors to blend in with your fleet. Made in 1:50 scale, and comes complete with hose and nozzel.
OBC-002-1Rss OBC-002 Barge Model, 1:50th Scale
Take a look and see what 30 years on the water teaches you about barge work. This model is 18" X 36", big enough to handle the 4100 ringer, and all complete in 1:50th scale. All you need to add is your crane and some water, and you are ready to go. Everything is weathered and is all set for your diorama work. It come complete with fuel tank, spuds, crane mats, saw horses, gang plank, concrete piles, wood for cribbing, ropes, tires, container, Oxy-Acy bottles and oil drums. Not much else is needed. Click on the thumb nail to get a good view of the detail built into this fine model. Since this is a speciality model, it will be drop shipped direct from manufacture to you, so you only pay shipping once. If your job requirments are more complex than this, additions can be requested. A quote for the extras will be provided.
OBC-10RCs Portable Fuel Tank --Large, W/ Pump--1:50
Now, you can add a large portable fuel tank to your Diorama. Complete with pump for fuel transfer. 1:50 scale and made of high impact material. At this point, they will be white. If you have other color needs, please inquire. PLEASE NOTE--Due to preorders, this item will be on backorder.
Triad4s Triad Display for 587T Pipelayer 1:48 Scale
A great chance to obtain a custom display for your Pipelayers. This diorama is custom made to fit three 587T pieplayers, with the correct track cleat spacing and length. This not only gives a sense of realizm but does aid in keeping your machines in place. Your display will come complete with coated pipe, and the proper slings to do the job. Please note, that the diecast pipelayers are not included with the display. Please email us at to determine if you have credits that can be applied toward the purchase of this display.

Your Shopping Cart
Contact us by phone c.(704) 661-4654 or email